Thiết bị chuyển mạch Switch Draytek VigorSwitch G1282 24-Port
Liên hệ
| VigorSwitch G1282
Physical Interfaces |
24 RJ-45 Ethernet Ports – 10/100/1000Mbps |
| Factory Reset Button | |
| 4 Selectable Ports (Nos. 25-28), use as either: | |
| 10/100/1000BaseT (Gigabit) Ethernet | |
| or SFP (1000M) Ports for Uplink / Fibre | |
| VLAN | 802.1q Tag-based VLAN |
| Port-based & MAC-based VLANs | |
| Up to 255 VLANs (out of 4096 VLAN IDs) | |
| Voice VLAN (OUI Mode) | |
| Surveillance VLAN (OUI Mode) | |
| Management VLAN | |
| Port Isolation (Protected Ports) | |
| QoS | Support 8 priority queues |
| Port-Based rate control (Ingress & Egress) | |
| Priority queue schedule (WRR or Strict Priority) | |
| Rate Limit | |
| Class of Service | |
| 802.1p CoS | |
| DSCP | |
| CoS-DSCP | |
| IP Precedence ToS | |
| Network Security | IP Source Guard with ARP inspection |
| IP Conflict Prevention | |
| Storm Control (Broadcast, Unknown Multicast, Unknown Unicast) | |
| DoS Attack protection | |
| Protected Port / Port Isolation | |
| Static Port Security | |
| Loop Detection & Prevention | |
| Access Control Lists (ACL) | |
| Up to 512 ACL Entries | |
| Source and destination MAC | |
| VLAN ID | |
| IPv4/v6 address | |
| Protocol | |
| TCP/UDP port | |
| Spanning Tree | Spanning Tree Protocol (STP) |
| Rapid Spanning Tree Protocol (RSTP) | |
| Link Aggregation | Combine multiple ports to increase bandwidth |
| 8 Aggregation Groups | |
| Up to 8 ports in each group | |
| LACP or Static setup | |
| Supports traffic load balancing | |
| Networking Performance | Switching Capacity: 56Gbps |
| Forwarding Rate: 41.7Mpps (64 bytes) | |
| Jumbo Frames up to 9KB | |
| Packet Buffer size: 4.1Mbit | |
| MAC Address Table: 8000 entries | |
| Multicast | Up to 256 multicast groups |
| Multicast Group Filtering / Throttling | |
| IGMP Snooping V2/V3 (BISS) | |
| IGMP V2/V3 Querier | |
| Multicast VLAN registration | |
| ONVIF Surveillance Management | Discovery of ONVIF-compliant IP Cameras |
| Surveillance Topology | |
| Real-Time Video Streaming | |
| ONVIF Device Maintenance | |
| Device Information | |
| Network Settings Configuration | |
| Time Settings | |
| Reboot | |
| Reset to Factory Default Settings | |
| Ping Check with Mail Alert on disconnection | |
| Management | Central Management |
| VigorACS | |
| VigorConnect | |
| Vigor Router Switch Management | |
| (requires router firmware support) | |
| IPv4 & IPv6 Dual-Stack | |
| Web User Interface | |
| Firmware Upgrade/Backup | |
| Configuration Backup/Restore | |
| Factory Default | |
| System Reboot | |
| 2-level Admin Privileges | |
| Multiple Admin Accounts | |
| Command Line Interface (CLI) via SSH/Telnet | |
| OpenVPN Client with Certificate-based auth | |
| SNMP v1, v2c, v3 (with Generic Traps) | |
| SNTP (Simple Network Time Protocol) | |
| LLDP(802.1ab) + MED | |
| Diagnostics | Port Status & Usage display |
| CPU/RAM Usage display | |
| MAC Address Table | |
| Device Check | |
| Syslog | |
| Mail Alert | |
| Port Status | |
| Port Speed Change | |
| System Restart | |
| Device Check | |
| IP Conflict | |
| ONVIF IP Camera Snapshot | |
| Port Mirroring | |
| Ping Diagnostics | |
| Port-based Cable Test | |
| IPv4 Features | DHCP Client |
| DNS Client | |
| IPv6 Features | Auto Configuration |
| Static IPv6 Address & Prefix Length | |
| Static IPv6 Default Gateway | |
| IPv6 Neighbour Discovery (ND) | |
| IPv6 Duplicate Address Detection | |
| ICMPv6 | |
| DHCPv6 Client | |
| General IEEE Standards Compliance | 802.3 10Base-T |
| 802.3u 100Base-T | |
| 802.3ab 1000Base-T | |
| 802.3x Flow Control | |
| 802.3 Auto-Negotiation | |
| 802.1q Tag-based VLAN | |
| 802.1p Class of Service | |
| 802.1d STP | |
| 802.1w RSTP | |
| 802.3ad LACP | |
| 802.1AB LLDP | |
| 802.3az EEE | |
| Operating Requirements | Power Input Requirements: 100-240VAC |
| Power supply: Internal | |
| Maximum Input Power Consumption: 36 Watts | |
| Cooling: Passively cooled, no fan | |
| Operating Temperature: 0 °C to 50 °C | |
| Storage Temperature: -20 °C to 70 °C | |
| Operating Humidity: 10% to 90% RH (non-condensing) | |
| Physical Specifications | Dimensions: 441 x 206 x 44 mm (W x D x H) |
| Rack mountable: 1U | |
| Weight: 2.8 Kg | |
| Box Contents | VigorSwitch G1282 Network Switch |
| UK IEC13 Power Cable | |
| 1U Rack Mount Fittings | |
| Quick Start Guide | |
| ROHS & CE Compliant | |
| Warranty | Two (2) Year Manufacturer’s RTB |
| VigorCare C3 3 Year Subscription: VCARE-C3 | |
| VigorCare C5 5 Year Subscription: VCARE-C5 |



